BYSWB - D'FOAM P
- MSDS: BYSWB
- Manufacturer: CASTROL INDUSTRIAL INC
- Product Name: D'FOAM P
- National Stock Number: 7930-00N062572
Product Identification
Product ID:D'FOAM P
MSDS Date:12/06/1993
FSC:7930
NIIN:00N062572
MSDS Number: BYSWB
Responsible Party
DOWNERS GROVE, IL 60615-1280
US
Emergency Phone: 708-241-4000
Info Phone: 708-241-4000
Preparer: RICARDO SIMMONS
Cage: CASTI
Contractor
Telephone: 708-241-4000
Cage: CASTI
Ingredients
GLYCOLS, POLYETHYLENE-POLYPROPYLENE; (OXIRANE, METHYL-,
CAS: 9003-11-6
RTECS: MD0907950
Fraction By Weight: 95-100%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50(ORAL,RAT):>5.0 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CONC WILL CAUSE IRRIT. SKIN
ABSORP:CONC IS NOT EXPECTED TO BE TOX. SKIN CONT:CONC MAY CAUSE
IRRIT. INHAL:TLV FOR PROD NOT ESTABLISHED. REFER TO HAZ INGS LIST
FOR ANY ING TLV'S. MISTS OF CONC & DI LUTIONS MAY CAUSE RESP IRRIT.
INGEST:CONC IS NOT EXPECTED TO BE TOX. CHRONIC:REVIEW OF LITERATURE
DOES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:NOT SHOW OBVIOUS LONG TERM HAZARD.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMED FLUSH W/PLENTY OF WATER FOR @ LST 15 MIN. GET MED
ATTN IMMED. SKIN:FLUSH W/PLENTY OF WATER. REMOVE CONTAM CLTHG &
WASH BEFORE REUSE. GET MED ATTN IF IRRIT PERSISTS. INHAL:REMOVE TO
FRESH AI R. IF NOT BRTHG, GIV ARTF RESP. IF BRTHG IS DFCLT, GIVE
OXYG. GET MED ATTN IMMED. INGEST:DILUTE WITH WATER AND INDUCE
VOMITING; CONSULT PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point Method:COC
Flash Point:450F,232C
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM, OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . COOL FIRE EXPOSED CONTAINERS WITH WATERSPRAY
TO PREVENT RUPTURE.
Unusual Fire/Explosion Hazard:AVOID POSSIBLE SPONTANEOUS COMBUSTION BY
PROPER DISPOSAL OF COMBUSTIBLE MATERIALS SOAKED WITH THIS PRODUCT.
Accidental Release
Spill Release Procedures:SPILLS SHOULD BE CONTAINED, ABSORBED AND
PLACED IN SUITABLE CONTAINERS FOR DISPOSAL. DO NOT DISCHARGE INTO
WATERWAYS OR SEWER SYSTEMS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT WITH EYES. AVOID
BREATHING MISTS. DO NOT TAKE INTERNALLY. KEEP CONTAINERS CLOSED
WHEN NOT IN USE. BRING PROD TO ROOM TEMP BEFORE USE.
Other Precautions:CONTAINER HANDLING:DO NOT CUT OR WELD EMPTY DRUMS
UNLESS THOROUGHLY CLEANED.
Exposure Controls
Respiratory Protection:GOOD INDUST HYGIENE PRACT REC THAT ENGINEERING
CTLS BE USED TO REDUCE ENVIRON CONCS TO THRESHOLD LIM VALUE
(TLV)/PERMISSIBLE EXPOS LIM (PEL). IF ANY ASSOC TLV/PEL IS
EXCEEDED, PROVIDE NIOSH/MSHA APPRO VED RESPIRATORY PROTECTION.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES SUCH AS RUBBER.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EMERG EYE WASH AND DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . APPROPRIATE CLOTH TO AVOID SKIN CONT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:5.5-6.7 @ 3%. WASTE DISP METH:STATUS OF THE WASTE AT THE TIME OF ITS
DISPOSAL.
Chemical Properties
Vapor Density:<1
Spec Gravity:1.02 (H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:<1 (BUTYL ACETATE=1)
Solubility in Water:1-10%
Appearance and Odor:COLORLESS TRANSPARENT LIQUID, POLYOL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:TEMPERATURES > 250F DUE TO POSSIBLE
DECOMPOSITION.
Hazardous Decomposition Products:POTENTIAL COMBUSTION PRODUCTS ARE
OXIDES OF CARBON.
Disposal
Waste Disposal Methods:DISP OF IN ACCORD W/LOC, STATE & FED REGS. DISP
OF MATL TO LAND MAY BE BANNED BY FED LAW (40 CFR 268). PROD AS
PURCHASED DOES NOT FALL UNDER CURRENT U.S. EPA RCRA DEFINITIONS OF
HAZ WASTE. UNDER RCRA IT IS GENERATOR'S RESPONSIBILITY TO
DETERM(SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.